Tag: Thicc
Showing all 8 resultsSorted by latest
-
×
Shendrones Thicc Propguards
£49.99 (ex VAT: £41.66)
Shendrones Thicc Propguards: like bubble wrap for your drone’s feet. Prevent prop-astrophes with these carbon guardians.
Out of stock
Open full product page
Item discontinued01Out of stock
Item discontinued£49.99 (ex VAT: £41.66) -
×
Shendrones 3D Printed Frame Parts for Thicc 3
£14.95 (ex VAT: £12.46)
This is a set of 3D printed parts for the Shendrones Thicc V3 X8 quadcopter.
Only 1 left in stock
Open full product page00Only 1 left in stock£14.95 (ex VAT: £12.46) -
×
Shendrones Thicc V3 Cinelifter (Carbon Hardware Only)
£169.95 (ex VAT: £141.63)
Shendrones Thicc 3.0, the ‘Chuck Norris’ of drone frames! Its 10mm carbon arms make it tougher than a three-day-old baguette. No flexing here, just pure, carbon-clad, FPV glory. #FlyThiccOrGoHome!
Please note, this is for the carbon plates and hardware only, 3D prints are sold separately.
Out of stock
Open full product page
Item discontinued00Out of stock
Item discontinued£169.95 (ex VAT: £141.63) -
×
Shendrones Thicc Universal Cam Mount w/ Silicone
£109.95 (ex VAT: £91.63)
A cam mount that lets you use (almost) every camera on your Thicc V2 or V3 cinelifter frame.
Out of stock
Open full product page
Item discontinued00Out of stock
Item discontinued£109.95 (ex VAT: £91.63) -
×
(EOL) Shendrones Thicc Duct Mount 4pc
£26.00 (ex VAT: £21.67)
This is set of carbon plates (and screws) that let you add some ducts to your Shendrones Thicc frame. 3D printed duct is not included.
Only 2 left in stock
Open full product page00Only 2 left in stock£26.00 (ex VAT: £21.67) -
×
Shendrones Thicc Universal Cam Mount w/ Alpha Gel
£144.95 (ex VAT: £120.79)
A cam mount that lets you use (almost) every camera on your Thicc V2 cinelifter frame.
Out of stock
Open full product page
Item discontinued00Out of stock
Item discontinued£144.95 (ex VAT: £120.79) -
×
Shendrones Thicc 2.1 FPV Cinelifter X8
£99.95 (ex VAT: £83.29)
IMPORTANT NOTE: As of Version 2.1, no camera mounting plate is included. You will need to purchase a camera mounting solution such as the Thicc Universal Camera Mount separately, or use your own solution.
Thicc V2 is a 390mm 7″ X8 made to carry larger cameras like the Black Magic Pocket. The camera mounts with a 1/4-20 screw and straps. The V2 of this frame changes the frame configuration to be more symmetrical (no longer deadcat) which greatly improve flight characteristics to give you the best possible cinematic shots.
Out of stock
Open full product page
Item discontinued00Out of stock
Item discontinued£99.95 (ex VAT: £83.29) -
×
(EOL) Shendrones 3D Printed Frame Parts for Thicc 2.1
£19.72 (ex VAT: £16.43)
This is a set of 3D printed parts for the Shendrones Thicc V2 X8 quadcopter.
Only 2 left in stock
Open full product page00Only 2 left in stock£19.72 (ex VAT: £16.43)
