Tag: 3D Printed
Showing 1–12 of 49 resultsSorted by latest
-
×SO-ARM101 Low-Cost AI Arm 3D Printed Skeleton
£34.99 (ex VAT: £29.16)
The SO-ARM101: Because nothing says ‘robotic mastery’ like assembling plastic limbs and making them do your bidding with open-source sorcery.
In stock
Open full product page00£34.99 (ex VAT: £29.16) -
×
TBS Source One V5 Analog TPU 3D Printed Parts
£4.95 (ex VAT: £4.13)
Stop your Source One’s dangly bits! Our TPU kit mounts your SMA, RX antenna & XT60 tighter than your budget after buying more drone parts. Fly clean, crash tough. Your quad’s dignity depends on it. Get yours & stop the wobble of shame!
In stock
Open full product page00£4.95 (ex VAT: £4.13) -
×
SMA Antenna Mount TPU for Source One V5
£3.49 (ex VAT: £2.91)
Tired of antenna anxiety on your Source One? This TPU mount grips your SMA & ELRS T tighter than you grip your goggles mid-powerloop. Clean build, strong signal. Less fixing, more ripping! Get yours & stop the flop!
In stock
Open full product page01£3.49 (ex VAT: £2.91) -
×
UMT 20×20 to 25×25 Mounting Adapter
£1.95 (ex VAT: £1.63)
Stop forcing parts that don’t fit! Our 20×20<>25×25 adapter ends mounting misery. Less swearing, more flying. It’s like couples therapy for your drone components. Get yours & restore electronic harmony! UMT Adapter – problem solved.
In stock
Open full product page01In stock£1.95 (ex VAT: £1.63) -
×
Straw Hat Vulture 3D Printed Parts Kit
£14.95 (ex VAT: £12.46)
Finally, a kit that lets you frame your shots and your drone. Build your Straw Hat Vulture, take to the skies, and give Spielberg a run for his money—minus the whole blockbuster budget.In stock
Open full product page00£14.95 (ex VAT: £12.46) -
×
AOS T3 3D Printed Canopy (14mm Nano Cameras)
£4.00 (ex VAT: £3.33)
The smooth operator of toothpick canopies designed by the master himself, designed by Chris Rosser for nano sized cameras.
Out of stock
Open full product page
Restock in 2+ Weeks00Out of stock
Restock in 2+ Weeks£4.00 (ex VAT: £3.33) -
×
AOS T3 3D Printed Canopy (19mm Nano Cameras)
£4.00 (ex VAT: £3.33)
The smooth operator of toothpick canopies designed by the master himself, designed by Chris Rosser for micro sized cameras.
In stock
Open full product page00£4.00 (ex VAT: £3.33) -
×
Screw Tray 3×2: Bolt Jail
£1.50 (ex VAT: £1.25)
Keep your screws in check and your sanity intact with this 3×2 Screw Organizer Tray—perfect for makers, drone builders, and anyone tired of screws staging daring escapes off the workbench. With six compartments of organized bliss, it’s like a tiny, 3D-printed therapist for your chaotic projects.
Only 1 left in stock
Open full product page01Only 1 left in stock£1.50 (ex VAT: £1.25) -
×
XT30 Battery Cap Covers w/ Colour Indicators
£3.95 (ex VAT: £3.29)
Forget the guessing game. Our XT30 Battery Caps make it easy. Snap them on and instantly know your battery status. Green means go, red means nope, and yellow means storage snooze.
In stock
Open full product page01£3.95 (ex VAT: £3.29) -
×
XT60 Battery Cap Covers w/ Colour Indicators
£3.95 (ex VAT: £3.29)
FPV pilots! Tired of the battery roulette? Slap on our XT60 Caps and read ’em like tea leaves. Green for go, red for nope, and blue for the storage snooze.
Backorder:
Open full product page
Restock in 2+ Weeks01Backorder:
Restock in 2+ Weeks£3.95 (ex VAT: £3.29) -
×
XT60 Battery Cap Covers w/ Charge Indicators
£3.95 (ex VAT: £3.29)
Banish the ’empty-or-charged’ roulette game with our XT60 battery caps! It’s like having a barista for your batteries, always serving up just the ‘charge’ you asked for.
Out of stock
Open full product page
Item discontinued00Out of stock
Item discontinued£3.95 (ex VAT: £3.29) -
×
Shendrones Waterproof Skirt Kit for Legato
£33.90 (ex VAT: £28.25)
This is a waterproof skirt kit for your Shendrones Legato, to give you electronics a waterproof seal. Inluded also is a heatsync for your ESC.
Only 2 left in stock
Open full product page00Only 2 left in stock£33.90 (ex VAT: £28.25)
